Home      About     Database     Testing     Monitoring    Parameters     GeoDirectory     GeoSoftware

Proctor Compaction Test
Geotechdata.info - Updated 04.10.2016

Pricing information and quote request on Geotechgate.com

CONCEPT  
The Proctor compaction test is a laboratory geotechnical testing method used to determine the soil compaction properties, specifically, to determine the optimal water content at which soil can reach its maximum dry density. The original test is offren reffered to as Standard Proctor Test, which was later modified and reffered to as Modified Proctor Test. The difference between the two tests lies mainly in the compaction enegry.
DESCRIPTION AND PROCEDURE
The Proctor compaction test consists of compacting soil samples at a given water content in a standard mould with standard compaction energy. The standard Proctor test uses a 4-inch-diameter mould with the compaction of three separate layers of soil using 25 blows by a 5.5 lb hammer falling 12 inches.

In the Proctor test, the soil is first air dried and and then separated into 4 to 6 samples. The water content of each sample is adjusted by adding water (3% - 5% increments or more depending on the type of the soil).

The soil is then placed and compacted in the Proctor compaction mould in three different layers where each layer receives 25 blows of the standard hamer. Before placing each new layer, the surface of the previous layers is scratched in order to ensure a uniform distribution of the compaction effects.

At the end of the test, after removing and drying of the sample, the dry density and the water content of the sample is determined for each Proctor compaction test. Based on the whole set of results, a curve is plotted for the dry unit weight (or density) as a function of the water content. From this curve, the optimum water content to reach the maximum dry density can be obtained.

STANDARDS
  • ASTM D698 - 12 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft3 (600 kN-m/m3)) Link
  • ASTM D1557 - 12 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3)) Link
IMAGES*
oedo1   oedo2
VIDEOS*
REQUEST A QUOTE
Free quote for buying Proctor Compaction Test equipment: Request a Quote
REFERENCES - EXTERNAL LINKS
  • NOT AVAILABLE

Can you edit this page? Send us an email to editor@geotechdata.info
* The images and videos on this page are niegher owned nor hosted by Geotechdata.info. You are responsible for checking the copyright status of images with the owener before using them.